SMOK TFV8 Baby Beast Coils (5 Pack)

SMOK TFV8 Baby Beast Coils are belonging to the SMOK TFV8 Baby Beast Coil Family

The V8 Baby coils are designed for the TFV8 Baby Beast Sub-Ohm Tank.

Product Specifications:
V8 Baby-Q2 Dual Coil 0.4ohm 40-80W Best 55-65W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-Q2 Dual Coil 0.6ohm 20-50W Best 30-40W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-M2 Dual Coil 0.15ohm 25-45W Best 35W (Compatible with 3.7V mechanical mod functions-i.e. Bypass Mode) Warning: Don't use it with Mech Mods!!
(Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-M2 Dual Coil 0.25ohm 25-45W Best 35W (Compatible with 3.7V mechanical mod functions-i.e. Bypass Mode) Warning: Don't use it with Mech Mods!!
(Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-X4 Quadruple Coil 0.15ohm 30-70W Best 45-60W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T6 Sextuple Coil 0.2ohm 40-130W Best 70-90W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T8 Octuple Coil 0.15ohm 50-110W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T12 Duodecuple Coil 0.15ohm Without Light 50-90W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T12 Duodecuple Coil 0.15ohm Red Light 50-90W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T12 Duodecuple Coil 0.15ohm Orange Light 50-90W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-T12 Duodecuple Coil 0.15ohm Green Light 50-90W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-Mesh Coil 0.15ohm 40-80W Best 60-70W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

V8 Baby-Strip Coil 0.15ohm 40-100W Best 60-80W (Launched with the TFV8 Baby Beast Sub-Ohm Tank) - WATTAGE MODE ONLY

Compatibility:
Consult the Atomizers utilizing SMOK TFV8 Baby Beast Coil Family at the Atomizers Using The Same Coils Category

Are all of these coils, working with my compatible AIO Pod System?
Consult the Coil Specs per System Categories

* As with Pod Tanks, Sub-Ohm Tanks & MTL Tanks, the paired device dictates the Ohm Limit of your coils
Warning: DO NOT use such atomizers with Mechanical Mods or a hard short might occur which can result in the battery bursting.

Please Note: Before using Sub-Ohm coils requiring high wattage you must ensure that your batteries can handle them safely.
Improper use can lead to damage or injury.

How to prime your new coil:
New coils must ALWAYS be fully saturated before FIRST use, otherwise the cotton inside will be burned.
Hold the coil in your hand and drip not just a few drops of e-Liquid but the required amount (Dependent on the coils' size) directly into the top hole. Do this on an angle, so that the cotton on the inner wall absorbs the e-Liquid. Next, start dripping some e-Liquid into the holes on the sides of your coil. There may be 2 or more drops for each hole, and you’ll notice that the e-Liquid is quickly absorbed by the cotton. You’ll want to make sure that you keep dripping into these holes until it stops absorbing it. Install the coil into your atomizer, fill the latter with e-Liquid and take a couple of puffs but with your device off and your airflow open. Don’t inhale too hard. Just inhale as if you’re taking a normal draw. Your coil is fully saturated!

Comment:
Replacement Coils are almost always produced and sold by pack of 5 or pack of 4, of 3 or 2. Sometimes we hear of vendors selling them by the unit - please be aware of this. We do not recommend buying coils by the unit - from a hygiene standpoint - it forces the package to be opened and cut through the sealed packaging. Also when you buy coils by the unit you don't get the scratch-and-check authentication sticker that's on retail box!