PREMADE COILS

Vapordna.gr offers a variety of machine-made / handcrafted round wire coils and machine-made mesh strip coils for vapers who enjoy using pre-built coils or don’t have the time to build on their own.

With low resistance coils, large amounts of vapor is created, thus we advise that you do not use an e-liquid that has higher than 10mg/ml nicotine strength.

If your device supports TC Mode / TCR Mode, choose the proper TC Mode or set the proper TCR value if you want to try temperature control vaping.

• If TCR value you set is higher than actual, you'll burn the coil(s).

• If TCR value you set is lower than actual, the atomizer won't vaporize properly.

• If a wrong TC Mode is chosen, either the atomizer won't vaporize properly (Lack of vapor) or you'll burn the coil(s).

* Don't forget to remove hot spots by pulsing your round wire coils before first use! (Unless the round wire coils are not micro coils, but spaced coils instead)

Temperature control mode was developed to stop the occurrence of burnt coils or 'dry hits'.

Temperature Control capable devices measure the changes in your coil's resistance and assign a temperature value to them.

You can set a maximum temperature your coils will reach and your device will alter the power output to ensure that your coils never reach beyond the set limit.

TCR VALUES (ppm change in electrical resistance per degree of temperature change)

Alloy: SS316L TCR: 0.000879 (Set 0087 for a 4 digit screen display - 087 for a 3 digit screen display)

Alloy: SS316   TCR: 0.000880 (Set 0088 for a 4 digit screen display - 088 for a 3 digit screen display)

Alloy: SS304   TCR: 0.001010 (Set 0101 for a 4 digit screen display - 101 for a 3 digit screen display)

Alloy: SS317L TCR: 0.000940 (Set 0094 for a 4 digit screen display - 094 for a 3 digit screen display)

Alloy: SS430   TCR: 0.001380 (Set 0138 for a 4 digit screen display - 138 for a 3 digit screen display)

Alloy: SS904L TCR: 0.000734 (Set 0073 for a 4 digit screen display - 073 for a 3 digit screen display)

Alloy: Ni200   TCR: 0.006000 (Set 0600 for a 4 digit screen display - 600 for a 3 digit screen display)

Alloy: Ti1        TCR: 0.003660 (Set 0366 for a 4 digit screen display - 366 for a 3 digit screen display)

Rebuildable atomizers paired with Mechanical Mods:

All rebuildable atomizer coils must first be tested prudently with a proper meter prior to it being used, as untested atomizer coils can be extremely dangerous.
Coils that have been improperly configured or are otherwise faulty can blow your Mechanical Mod, which can result in serious injury to you and/or your property.
Atomizer coils that have been newly constructed must be tested on a meter, then first used on an advanced personal vaporizer (APV) that has all of the appropriate safety features, including short-circuit protection. Once the atomizer coil has been tested and used on such a device, you can then cautiously use the coil on a Mechanical Mod.

Disclaimer: By purchasing and using these products, you hereby consent to wholly taking full responsibility and sole liability for the purchase and use of any of these products. You further agree to hold harmless and indemnify Vapordna.gr, its managers, executives, successors, shareholders, owners, employees, directors, and all affiliates from any and all liability for the usage of these products. Vapordna.gr is in absolutely no way, shape, or form liable for the harm or hazard that may arise due to the use of these products.

Mesh Strip Coil Sizes Compatibility List available bellow the Rabbit Hole: MESH STRIP COIL SIZE FAMILIES COMPATIBILITY LIST