VooPoo PnP Coils (5 Pack)

VooPoo PnP Coils are belonging to the VooPoo PnP/GTX Coil Family

The PnP coils are designed for various VooPoo Pods & not only.

Product Specifications:
PnP-C1 Ceramic Coil 1.2ohm 10-15W MTL (Launched with the Drag Baby Trio AIO Box Mod System) - WATTAGE MODE ONLY

PnP-M1 Mesh Coil 0.45ohm 28-35W RDL (Launched with the Vinci Pod) - WATTAGE MODE ONLY

PnP-M2 Mesh Coil 0.6ohm 20-28W RDL (Launched with the Drag Baby Trio AIO Box Mod System) - WATTAGE MODE ONLY

PnP-R1 Regular Coil 0.8ohm 12-18W MTL (Launched with the Find S Trio Pod) - WATTAGE MODE ONLY

PnP-R2 Regular Coil 1.0ohm 10-15W MTL (Launched with the Vinci Air Pod) - WATTAGE MODE ONLY

PnP-VM1 Mesh Coil 0.3ohm 32-40W DL (Launched with the Vinci Pod) - WATTAGE MODE ONLY

PNP-VM2 Mesh Coil 0.6ohm 20-28W RDL (Launched with the Vinci Pod) - WATTAGE MODE ONLY

PnP-VM3 Mesh Coil 0.45ohm 25-35W RDL (Launched with the Vinci Pod) - WATTAGE MODE ONLY

PnP-VM4 Mesh Coil 0.6ohm 20-28W RDL (Launched with the Vinci Air Pod) - WATTAGE MODE ONLY

PnP-VM5 Mesh Coil 0.2ohm 40-60W DL (Launched with the PnP Pod) - WATTAGE MODE ONLY

PnP-VM6 Mesh Coil 0.15ohm 60-80W DL (Launched with the PnP Pod) - WATTAGE MODE ONLY

PnP-TM1 Mesh Coil 0.6ohm 20-25W RDL (Launched with the Argus Air Pod) - WATTAGE MODE ONLY

PnP-TM2 Mesh Coil 0.8ohm 12-18W MTL (Launched with the PnP MTL Pod) - WATTAGE MODE ONLY

PnP-TR1 Regular Coil 1.2ohm 10-15W MTL (Launched with the PnP MTL Pod) - WATTAGE MODE ONLY

PnP-TW30 Mesh Coil 0.3ohm 28-36W RDL (Launched with the PnP II Pod) - WATTAGE MODE ONLY

PnP-TW20 Mesh Coil 0.2ohm 40-55W DL (Launched with the PnP II Pod) - WATTAGE MODE ONLY

PnP-TW15 Mesh Coil 0.15ohm 55-70W DL (Launched with the PnP II Pod) - WATTAGE MODE ONLY

PnP-DW60 Mesh Coil 0.6ohm 18-23W RDL (Launched with the Vinci 3 Pod) - WATTAGE MODE ONLY

PnP-DW80 Mesh Coil 0.8ohm 12-16W MTL (Launched with the Vinci 3 Pod) - WATTAGE MODE ONLY

Compatibility:
Consult the Atomizers utilizing VooPoo PnP/GTX Coil Family at the Atomizers Using The Same Coils Category

Are all of these coils, working with my compatible AIO Pod System?
Consult the Coil Specs per System Categories (Various Parts, you have to struggle a bit!)

* As with Pod Tanks, Sub-Ohm Tanks & MTL Tanks, the paired device dictates the Ohm Limit of your coils
Warning: DO NOT use such atomizers with Mechanical Mods or a hard short might occur which can result in the battery bursting.

Please Note: Before using Sub-Ohm coils requiring high wattage you must ensure that your batteries can handle them safely.
Improper use can lead to damage or injury.

How to prime your new coil:
New coils must ALWAYS be fully saturated before FIRST use, otherwise the cotton inside will be burned.
Hold the coil in your hand and drip not just a few drops of e-Liquid but the required amount (Dependent on the coils' size) directly into the top hole. Do this on an angle, so that the cotton on the inner wall absorbs the e-Liquid. Next, start dripping some e-Liquid into the holes on the sides of your coil. There may be 2 or more drops for each hole, and you’ll notice that the e-Liquid is quickly absorbed by the cotton. You’ll want to make sure that you keep dripping into these holes until it stops absorbing it. Install the coil into your atomizer, fill the latter with e-Liquid and take a couple of puffs but with your device off and your airflow open. Don’t inhale too hard. Just inhale as if you’re taking a normal draw. Your coil is fully saturated!

Comment:
Replacement Coils are almost always produced and sold by pack of 5 or pack of 4, of 3 or 2. Sometimes we hear of vendors selling them by the unit - please be aware of this. We do not recommend buying coils by the unit - from a hygiene standpoint - it forces the package to be opened and cut through the sealed packaging. Also when you buy coils by the unit you don't get the scratch-and-check authentication sticker that's on retail box!