[Hybrid Safe] Hellvape MD MTL RTA

0 Rating
29,50 €
SKU: VD-1474

 The MD RTA by Hellvape is the premier flavor inducing RTA, offering smooth and delicious flavor thanks to the turntable style airflow and external airflow port. The MD was designed with flavor at the forefront and each component was engineered to deliver the best taste e-Juice has to offer. But don't be fooled, this RTA is more than capable when it comes to ease of use as well with its single coil build deck and bottom set airflow design.

The Hellvape MD RTA stands at 44mm from base to drip tip, is 24mm in diameter, and weighs in at 1.6 ounces.
Hellvape has put a lot of thought into the creation of this atomizer, and it shows in every aspect. A elegant knurled airflow control ring allows the user to adjust the single 7mm by 2mm slot. This air slot can be adjusted with six pre set MTL adjustments, which lead to the center airflow channel located in the center of the build deck. The deck itself is a single coil design with 4mm terminals and top mounted flat head screws.

Surrounding the airflow channel are two large wicking channels which allow the user to easily wick and re-wick the atomizer.
The most defining feature of which this atomizer was built around is the turn table styled airflow which is secured inside the build deck section via a side mounted o-ring. This feature offers users a smooth steady flow of air to the coil and can be adjusted to the users preference.

The turn table styled airflow has two different styles, one wide open slot and a MTL three hole variation. Included in the packaging is a second turn table which has even more slots for a direct lung vaping experience. The standard glass section holds 2ml of vape juice, while the included glass extension section holds a total of 4ml! The MD RTA is easily filled via the slide to fill, top fill system that has one wide fill port. This top fill system is also child proof.

Product Specifications:
24mm Base Diameter
Slide To Fill Top Fill
2ml Standard Glass Tank Section E-Juice Capacity
4ml Bubble Glass Tank Section E-Juice Capacity
Child Proof
Must Remove Drip Tip
Single Coil Build Deck
4mm Each Terminal
Top Mounted Flat Head Screws
Dual Wicking Ports
PEEK Insulated Positive Post
Dual Bottom Airflow Channels
Adjustable Bottom Airflow
Knurled Design
Single Airflow Slots
6 Airflow holes
7mm by 2mm Outer Slot
Fully Adjustable
3mm bore 510 Drip Tip
8mm bore 510 Drip Tip
Threaded 510 Pin
Gold Plated

Product Includes:
1 x MD MTL RTA
1 x 2ml Glass Tube (Pre-Installed)
1 x 4ml Bubble Tank Tube
1 x Spare Drip Tip
1 x Turntable
1 x Prebuilt Coil 0.7ohm
1 x Prebuilt Coil 1.2ohm
1 x Spare Parts Bag
1 x Hellvape Sticker
1 x Screwdriver
1 x User Manual

IMPORTANT NOTE: Rebuildable Atomizers (RTAs, RDAs, etc.) are ADVANCED USER PRODUCTS and ARE NOT recommended for average users or beginners.

NOTE: It is highly recommended that you fully clean out this product before the first time you use it. While the factory does a decent job at removing dust, shavings, machining lubricants and greases, there is still the potential for trace elements to remain, and it is best recommended that you do an additional cleaning to meet your standard of cleanliness.

MD RTA 24mm by Hellvape vapexperts 1

MD RTA 24mm by Hellvape vapexperts 2

MD RTA 24mm by Hellvape vapexperts 3

MD RTA 24mm by Hellvape vapexperts 9

MD RTA 24mm by Hellvape vapexperts 4

MD RTA 24mm by Hellvape vapexperts 5

MD RTA 24mm by Hellvape vapexperts 10

MD RTA 24mm by Hellvape vapexperts 6

MD RTA 24mm by Hellvape vapexperts 9

MD RTA 24mm by Hellvape vapexperts 7

There are yet no reviews for this product.

Please log in to write a review. Log in