WIRE SPOOLS

* Sold single, unless stated otherwise 

Vapordna.gr offers a variety of wire spools for vapers who enjoy building their own coils.

Note: 1 Foot(ft) is equal to 0.3048 meters

With low resistance coils, large amounts of vapor is created, thus we advise that you do not use an e-liquid that has higher than 10mg/ml nicotine strength.

If your device supports TC Mode / TCR Mode, choose the proper TC Mode or set the proper TCR value if you want to try temperature control vaping.

• If TCR value you set is higher than actual, you'll burn the coil(s).

• If TCR value you set is lower than actual, the atomizer won't vaporize properly.

• If a wrong TC Mode is chosen, either the atomizer won't vaporize properly (Lack of vapor) or you'll burn the coil(s).

Use extreme caution using Ni200 or Ti1 coils. If you burn them you'll inhale some very TOXIC fumes.

* Don't forget to remove hot spots by pulsing your round wire coils before first use! (Unless the round wire coils are not micro coils, but spaced coils instead)

DO NOT pulse Ni200 or Ti1 coils!! Build spaced coils instead.

Temperature control mode was developed to stop the occurrence of burnt coils or 'dry hits'.

Temperature Control capable devices measure the changes in your coil's resistance and assign a temperature value to them.

You can set a maximum temperature your coils will reach and your device will alter the power output to ensure that your coils never reach beyond the set limit.

TCR VALUES (ppm change in electrical resistance per degree of temperature change)

Alloy: SS316L                         TCR: 0.000879 (Set 0087 for a 4 digit screen display - 087 for a 3 digit screen display)

Alloy: SS316                           TCR: 0.000880 (Set 0088 for a 4 digit screen display - 088 for a 3 digit screen display)

Alloy: SS304                           TCR: 0.001010 (Set 0101 for a 4 digit screen display - 101 for a 3 digit screen display)

Alloy: SS317L                         TCR: 0.000940 (Set 0094 for a 4 digit screen display - 094 for a 3 digit screen display)

Alloy: SS430                           TCR: 0.001380 (Set 0138 for a 4 digit screen display - 138 for a 3 digit screen display)

Alloy: SS904L                         TCR: 0.000734 (Set 0073 for a 4 digit screen display - 073 for a 3 digit screen display)

Alloy: Ni200                            TCR: 0.006000 (Set 0600 for a 4 digit screen display - 600 for a 3 digit screen display)

Alloy: Ti1                                 TCR: 0.003660 (Set 0366 for a 4 digit screen display - 366 for a 3 digit screen display)

Alloy: Nickel DH                     TCR: 0.007036 (Set 0703 for a 4 digit screen display - 703 for a 3 digit screen display)

Alloy: NiFe30                          TCR: 0.003200 (Set 0320 for a 4 digit screen display - 320 for a 3 digit screen display)

Alloy: Nifethal 70(Alloy120)  TCR: 0.005250 (Set 0525 for a 4 digit screen display - 525 for a 3 digit screen display)

Alloy: Nifethal 52                    TCR: 0.004036 (Set 0403 for a 4 digit screen display - 403 for a 3 digit screen display)

Alloy: Tungsten                       TCR: 0.004500 (Set 0450 for a 4 digit screen display - 450 for a 3 digit screen display)

AMERICAN WIRE GAUGE (AWG) SIZES

#        Diameter[mm]

18          1.0236

19          0.9118

20          0.8128

21          0.7239

22          0.6452

23          0.5740

24          0.5105

25          0.4547

26          0.4039

27          0.3607

28          0.3200

29          0.2870

30          0.2540

31          0.2261

32          0.2032

33          0.1803

34          0.1600

35          0.1422

36          0.1270

37          0.1143

38          0.1016

39          0.0889

40          0.0787

Let us know what we’re missing or if you find any errors, hit us up via the contact form.

Useful link for coil builders

Steam Engine

Rebuildable atomizers paired with Mechanical Mods:

All rebuildable atomizer coils must first be tested prudently with a proper meter prior to it being used, as untested atomizer coils can be extremely dangerous.
Coils that have been improperly configured or are otherwise faulty can blow your Mechanical Mod, which can result in serious injury to you and/or your property.
Atomizer coils that have been newly constructed must be tested on a meter, then first used on an advanced personal vaporizer (APV) that has all of the appropriate safety features, including short-circuit protection. Once the atomizer coil has been tested and used on such a device, you can then cautiously use the coil on a Mechanical Mod.

Disclaimer: By purchasing and using these products, you hereby consent to wholly taking full responsibility and sole liability for the purchase and use of any of these products. You further agree to hold harmless and indemnify Vapordna.gr, its managers, executives, successors, shareholders, owners, employees, directors, and all affiliates from any and all liability for the usage of these products. Vapordna.gr is in absolutely no way, shape, or form liable for the harm or hazard that may arise due to the use of these products.